PTFE stainless steel wire pipe

PTFE hose ID: 8mm~150mm Inner tube:PTFE Color:White/Transparent Cover: stainless steel wire or nylon,Can be customized

PTFE Metal Pressure Tubing

PTFE High Pressure Hose Series

Features: These hoses can be covered by various clad materials according to

customersdifferent anti-pressure require ments, so as to satisfy their demand on anti-pressure.

Construction : Extruded Teflon® tube with a stainless steel single wire braid cover.

Temperature : -73° C to +260° C

Application : Brake and Clutch hoses. Instrument hoses. Fuel injection hoses. Fire extinguisher lines. Turbocharger oil feed and boost hoses. Any application subjected to high temperatures.

Flexible PTFE Metal Pressure Tubing

Tube:PTFE(polytetrafluorethylene)

Reinforcement:one stainless steel braid

Application range:average pressure application with hydraulic fluids within a high temperature

as well as aggressive media

PTFE pipe wrapped stainless steel wire and connection methods: Operating Instructions Users shall select types of quick couplings appropriately according to operating requirements and features of joints (including work pressure, medium properties, and flow, temperature, corrosiveness and ambient temperature, quantities and connecting types of pipes etc.)

PTFE Metal Pressure Tubing

Users shall pay attention as followed if one end is connected by directly welding to hard hoses: 2.1 Remove the rubber sealing ring out of plug bushing by using of special hook. After the welding is finished and joints are completely cool down, mount the sealing ring into the plug bushing. 2.2 If a special hook is not available, other alternative methods can be adopted: plug the inner diameter side of the sealing ring inside the plug bushing with wet cloth or cotton yarn, to prevent the sealing property from high temperature welding damage. 2.3 Quick couplings shall not be placed on conductors such as metal plate, to prevent the inner part being burned by interrupt circuit that will affect the sealing property and matching precision at last. Take cares on spherical surface (male quick coupling) and conical surface (female quick coupling) of ball joint during the process of usage and transportation, which shall not be scratched or crashed, in avoid of properties of connecting and sealing. Two important factors to improve the service life are to select types of quick

PTFE Metal Pressure Tubing coupling correctly, and then make reasonable installation.

PTFE paste paste tube PUSHING various performance indicators1 Proportion G / cc 2.12.32 Tensile strength Kg / sq cm ≥2003 Elongation % ≥2504 Impact Strength Cm x kg / sq cm ≥135 Brandt's strength kg / sq cm 4.546 Thermal Conductivity Kcal / m x hours °c 0.217 Linear expansion coefficient Cm / cm / °c

-100°c 1.09 x10-4-50~0°c 1.13 x 10-40~50°c 1.23 x 10-450~100°c 1.14 x 10-4100~150°c 1.365 x 10-4150~200°c 1.69 x 10-4

200~250°c 2.165 x 10-4

8 Volume resistivity Ohm x cm ≥1017

9 Surface Resistivity Ohm ≥101410 Permittivity 1000000 Week 1.82.211 Kok dielectric loss tangent 1000000 Week ≤2.5 x 10-412 Flammability Unburning 13 Climate-related resistance Good 14 D.C. voltage strength KV / mm (46) micron ≥60

PTFE Metal Pressure Tubing

PTFE stainless steel wire pipe