Jiangyin Jiangnan Fluoroplastic Co., Ltd.
Main products:PTFE tube and fittings
Products
Contact Us
  • Contact Person : Mr. Fu Jianming
  • Company Name : Jiangyin Jiangnan Fluoroplastic Co., Ltd.
  • Tel : 86-0510-86853132
  • Fax : 86-0510-86857418
  • Address : Jiangsu,jiangyin,NO.188 huadong road
  • Country/Region : China
  • Zip : 214431

teflon lined tees

teflon lined tees
Product Detailed
teflon lined tees This specification is applicable for PTFE lined pipes and fittings used for transmitting corrosive fluid.

Welcome TO Jiangnan Fluoroplastic                     

  PTFE(teflon) tubing/PTFE(teflon) hose/PTFE(teflon) fittings 

Jiangnan teflon lined tees provides the ultimate in lubricity, high temperature use, chemical resistance, biocompatibility, and precision tolerances.   

 

teflon lined tees                                   

 Jiangnan teflon lined tees Offers:

Excellent Lubricity - Lowest coefficient of friction of any polymerWorking temperature range -356° F (-180° C) to 482° F (250° C)Chemically Resistant (all common solvents, acids and bases)Jiangnan teflon/PTFE lined tees is chemically InertExcellent Dielectric Insulation Properties 

                    Jiangyin Jiangnan Fluoroplastic Co.,Ltd. 

      

Specification

    90 degree elbow A Value

  45 degree elbow A Value

  Tee  A Value

Petroleum Equipment  A Value

reducer connection A Value

DN10

70

45

70

70

 

DN15

80

56

80

80

 

DN20

85

60

85

85

 

DN25

90

62

90

90

 

DN32

100

64

100

100

 

DN40

115

64

115

115

 

DN50

120

68

120

120

100

DN65

130

72

130

130

100

DN80

140

78

140

140

100

DN100

150

98

150

150

100

DN125

190

108

190

190

150

DN150

230

118

230

230

150

DN200

250

130

250

250

200

DN250

250

155

250

250

200

DN300

280

180

280

280

200

DN350

350

260

315

315

250

DN400

400

300

370

370

250

Features:Professional, learning from experiences on dozens of big projects all over the countryfor decades.Having experience and capability on manufacture of supporting componentsaccording to various standards in America, Europe, Japan, Middle East, India andSouth America etc.Supplying supporting components to semiconductor, pharmaceutical products,chemical industry, textiles, automobile coatings and environmental protection and soon for years.Developing matching service on the production of ETFE, F46, PFA and PVDF andother products.

PTFE lined pipe work flow

PFA lined pipe 2.1.7 Elongation ASTM D638 100-300%2.1.8 Water absorption ASTM D570 0.01%2.2 PTFE liner2.2.1 Sizes of this type of PTFE lined pipes, flanges and fittings are from 1/2" to 12".2.3 Iron parts2.3.1 Pipes and fittingsPipes and fittings are made of welded or seamless steel pipes of iron parts. And the thickness is decided by international standards and customers’ requirements.2.3.2 FlangeFlanges are made according to any specification of international standard orANSI150LBS or JIS10K.3. Design Requirements3.1 Size3.1.1 Standard thickness of PTFE lined pipes Unit: mm

Note: for thickness of other PTFE lined pipes different from above and PFA linedpipes below 4", please refer to our sales engineer.3.1.2 Thickness of PTFE lined pipesSize 1/2"~ 4" Thickness of liner 3mm6"~ 8" 4mm10"~ 12" 5mm

3.1.3 Specification of size of lined flaring Unit: mm

3.2 Vent holesEvery pipe or fitting is equipped with vent holes to release gas between liners and ironparts. Each pipe shall at least have two vent holes of 0.12"(3mm)in diameter, locatedat flange faces of two ends, 2"(50mm); each fitting shall also at least have two ventholes; and reducing flange does not have any vent hole.

4. Detection requirements4.1 Hydraulic testInterior pressure test will be operated at 150% of maximum work pressure. Totalpressure can be reached within one minute and kept for 3 minutes.4.2 Pinhole testThe test shall be performed with high voltage equipment (10,000 V) that shall not bedestructive. After the current is connected, if any spark is produced from the probe orany pinhole warming sound is made by the detector, it means there is defect in theliner and thereby this part shall not pass quality inspection.4.3 Visual inspection and appearance paint brushThe surface shall not have any bubble, pinhole or other defects. All defects shall befixed before shipment. After visual inspection, an epoxy resin base coat shall becoated outside the pipes and fittings.

  

CERTIFICATION-PTFE  lined fittings

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v13/714942989_1/teflon_lined_tees.jpg' , 'http://i01.i.aliimg.com/photo/v13/714942989_2/teflon_lined_tees.jpg' , 'http://i01.i.aliimg.com/photo/v13/714942989_3/teflon_lined_tees.jpg' , 'http://i01.i.aliimg.com/photo/v13/714942989_4/teflon_lined_tees.jpg' , 'http://i01.i.aliimg.com/photo/v13/714942989_5/teflon_lined_tees.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); teflon lined tees



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.